Brake Pads

• Ceramic friction formulas provide excellent stopping power hot or cold
• Longer pad life than other friction materials
• Low dust formulations keep wheels cleaner
• 100% shimmed to eliminate noise and vibration
• 100% positive molded for even wear characteristics
• Scorched for improved bed-in
• OE style chamfers and gas slots to improve heat dissipation, eliminate noise and vibration
• Precision cut or shaved backing plates for a proper fit in the caliper body
• 100% non asbestos formulas
• Sold as a set for two wheels

These brake pads combine improved braking performance and reduced noise under braking to provide superior stopping power and reliability for passenger cars and light duty trucks without brake squealing, groaning, and vibration. Scorched for easy bed-in, these brake pads bring consistent and reliable braking power right out of the box providing a number of other benefits. Firstly, the pads are manufactured using OE positive mold technology that brings the benefit of consistent friction material density throughout the pad ensuring its long wear life. In addition, the pads are 100% shimmed to provide superior noise abatement. OE designed pads ensure a proper fit in the caliper, that is crucially important to prolong rotor and pad wear life and for consistent braking power throughout the lifetime of the brake pad. With shims installed to prevent noise associated with pad vibration, these brake pads are installation ready. They also feature OE style gas slots and chamfers to optimize braking performance in repeat stop situations.

These brake pads by Centric comply to current brake friction material state legislation such as CASB346 California Brake Friction Legislation, WA6557 Washington Brake Friction Legislation, and others. To meet all requirements, Centric Premium Ceramic brake pads are 100% asbestos- free. As a member of the Brake Manufacturers Council, Centric has been involved in the development of the LeafMark and edge code legislation. This code can be found printed on every brake pad manufactured after January 1, 2014 and indicates the level of compliance with state friction material content legislation.

Centric Parts® is North America’s leading manufacturer of aftermarket brake, suspension, steering, and more components for passenger vehicles, medium duty trucks, fleet vehicles, high performance vehicles and race cars. The company was founded in Southern California in 2000 and has enjoyed solid growth every year since. Originally focused on replacement parts for everyday use, Centric Parts has aggressively expanded into OE, armored vehicle, racing and performance markets. With an unparalleled level of research and development in North America, Centric continually innovates new products and offers significant improvements, earning multiple patents and numerous other industry honors along the way.

California Residents

WARNING Cancer and Reproductive Harm. www.p65warnings.ca.gov

• Formulated for longer wear
• High friction level at all temperatures
• Excellent pad for long rotor life
• High noise abatement
• High anti dust capability
• High temp fade resistant
• 100% shimmed to eliminate noise and vibration
• OE style chamfers and gas slots to improve heat dissipation, eliminate noise and vibration
• Precision cut or shaved backing plates for a proper fit in the caliper body
• 100% non asbestos formulas
• Copper-free friction formulas
• Come installation ready with OE style wear sensors attached
• Sold as a set for two wheels

These brake pads combine improved braking performance and reduced noise under braking to provide superior stopping power and reliability for passenger cars and light duty trucks without brake squealing, groaning, and vibration. The pads are 100% shimmed to provide superior noise abatement. OE designed pads ensure a proper fit in the caliper, that is crucially important to prolong rotor and pad wear life and for consistent braking power throughout the lifetime of the brake pad. With shims installed to prevent noise associated with pad vibration, these brake pads are installation ready. They also feature OE style gas slots and chamfers to optimize braking performance in repeat stop situations. All Centric Premium Brake Pad formulas are 100% asbestos free and have OE style wear sensors installed.

These brake pads by Centric comply to current brake friction material state legislation such as CASB346 California Brake Friction Legislation, WA6557 Washington Brake Friction Legislation, and others. To meet all requirements, Centric Premium Semi-Metallic brake pads are 100% asbestos free. As a member of the Brake Manufacturers Council, Centric has been involved in the development of the LeafMark and edge code legislation. This code can be found printed on every brake pad manufactured after January 1, 2014 and indicates the level of compliance with state friction material content legislation.

Centric Parts® is North America’s leading manufacturer of aftermarket brake, suspension, steering, and more components for passenger vehicles, medium duty trucks, fleet vehicles, high performance vehicles and race cars. The company was founded in Southern California in 2000 and has enjoyed solid growth every year since. Originally focused on replacement parts for everyday use, Centric Parts has aggressively expanded into OE, armored vehicle, racing and performance markets. With an unparalleled level of research and development in North America, Centric continually innovates new products and offers significant improvements, earning multiple patents and numerous other industry honors along the way.

California Residents

WARNING Cancer and Reproductive Harm. www.p65warnings.ca.gov

• Patented AF42/66 pad friction material features a low level of metallic compounds that reduces rotor wear by up to 50%
• Backing plate and side edges of brake pad are black powder coated for resistance to corrosion
• Pad surfaces have chamfered edges to reduce contact against rotor lip that forms over time and causes squealing
• Center gap allows for proper heat expansion of brake pads
• Built in noise-reducing shims
• Patented Brake-In™ red top coating provides better grip during the first 100 miles after new pads are installed
• Patented Brake-In™ red top coating scours off any existing glaze or heat spots from brake rotor surface for more even surface mating
• Sold as a set for two wheels

EBC Ultimax™ OEM Replacement Brake Pads are designed to match the exact dimensions of original equipment with extremely tight tolerances to ensure proper fit, even wear, and absence of rattles and squeaks. A patented low-metallic aramid compound uses DuPont Twaron composite to reduce the amount of steel wool necessary, so these pads cause far less abrasive wear on rotors without compromising brake pad efficiency or longevity. In government R90 tests of replacement brake components, EBC pads have shown to deliver equivalent performance, bedding, cold temperature operation, and speed sensitivity when compared to original manufacturer parts. EBC’s aramid material also ensures the pads are soft enough to avoid brake squeal, but not so soft that pad longevity becomes compromised. On some German vehicles, you may even see longer life with EBC pads than the original factory brake pads provided.

If you’re installing Ultimax™ OEM Replacement Brake Pads with new brake rotors, you’ll find down the road when the time comes to replace the pads again, rotors will still be usable enough to last through another set of brake pads. And if you are installing EBC pads without replacing rotors, pre-chamfered pad edges will mate perfectly against the grooves and lips that normally form on the rotor surfaces, so the meat of the pad makes contact against the rotor center where it counts. These pads also feature a red top layer coating designed to scour glaze and hot spots off worn brake rotors during the break-in process. As it does that, the coating also serves to provide a higher level of grip to counteract low friction levels that exist before bedding is complete. Built-in shims ensure any high-frequency vibration is absorbed rather than transferred as squealing noise, even under the most extreme weather conditions.

Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.

• Designed to provide an optimum combination for street use
• Unique composition allows high braking friction when brakes are cold
• Features a cold friction rating of 0.5
• Backing plate and side edges of brake pad are yellow powder coated for resistance to corrosion
• Pad surfaces have chamfered edges to reduce contact against rotor lip that forms over time and causes squealing
• Center gap allows for proper heat expansion of brake pads
• Built-in noise-reducing shims
• 0.48 stable friction once bedded
• Strong initial bite, work from cold
• Zero rotor damage
• Short to medium race lifetime
• Copper free for ECO compliance
• Provides equivalent performance to GG-rated brake pads
• Patented Brake-In™ red pad surface coating provides better grip during the first 100 miles after new pads are installed
• Patented Brake-In™ red pad surface coating scours off any existing glaze or heat spots from brake rotor surface for more even surface mating
• Sold as a set for two wheels

EBC Yellowstuff™ 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade. They are the most fastest brake pads for Trackday and Drift racing. EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads. When Yellowstuff™ see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.

Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.

• Low dust ceramic formula designed to maximize stopping power and keep wheels clean
• Multi-Layer rubberized shims provide virtually noise-free braking
• Includes Premium stainless-steel hardware for easy installation
• Chamfered and slotted to ensure noise-free braking
• Thermal scorched pad surface for a fast break-in
• Powder-coated backing plate resists rust and corrosion to provide extended pad life
• OE Positive Mold Technology for consistent wear and performance
• Sold as a two-wheel set

The Z17 Evolution Ceramic brake pad and hardware kit is the affordable stock replacement for your daily driven vehicle. The Ceramic pads’ low dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual layer high temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic brake pads

The true ceramic formula also generates far less ugly brake dust on your wheels, and wears less cast iron off your rotors. Every set of pads is supplied with PowerStop’s engineered dual-rubber-backed shims, which provide 6 times the noise reduction of the OEM plain steel shims. With 20% more stopping power, these are the pads to choose for everyday use. They’re manufactured to OEM standards, with all the proper slots and chamfers for a perfect fit and long life. Posi-mold pads enable consistent density as the material is hot pressed into a mold at over 6,000 psi. The result is consistent performance and low noise. All pads are asbestos free.

Founded in 1997 in Southern California, PowerStop® began with the goal of bringing the benefits of superior brake components at a reasonable cost to street performance and backyard performance enthusiasts everywhere. Company management and engineers believed then, as they do today, that better brakes make driving more enjoyable and safer for any vehicle, terrain, and driving style – not just street performance. They developed a philosophy that while brake components cannot be superior without the most advanced materials, they also cannot perform in a superior fashion without matching the exact tolerances of each and every individual vehicle they are created for. Relentless development and testing led to brake pads, rotors, drum shoes, and other related components that delivered uncompromising fit and operation, and PowerStop’s customer base grew exponentially from positive word of mouth. The company still has its original passion for creating the best products at the best possible prices, so when it comes to replacement brake components for your vehicle, PowerStop is the only name you need to know.

California Residents

WARNING Cancer and Reproductive Harm. www.p65warnings.ca.gov