Showing 901–912 of 1809 results

  • Injen® – PF Series Cold Air Itakes

    0 out of 5
    $301.95
    • A large air filter and large diameter air intake tube to maximize air volume
    • Uses the patented MR Technology tuning process to ensure the air/fuel ratio is within optimum limits
    • Custom designed and engineered to deliver maximum power for each specific vehicle
    • Improves acceleration and fuel economy
    • Every system includes the EA Nanofiber dry air filter
    • Air intake pipe constructed of mandrel-bent 6061 aluminum or cast aluminum for smooth airflow
    • Comes complete with all necessary mounting hardware and comprehensive installation instructions
    • Backed by a Limited Lifetime Warranty
    • Proudly manufactured in the USA

    The big “deep breathing” engine in your high performance car, truck or SUV needs a PF Series High-Flow Air Intake System to unleash all of its power. The system starts with a large EA Nanofiber dry air filter, installed in place of the restrictive factory airbox. The large increase in filter area over the stock airbox filter results in a huge increase in airflow and a greater capacity to capture and hold dirt.

    The increased airflow continues with a free-flowing mandrel-bent or cast aluminum intake tube in place of the factory air path. The use of a casting was necessitated on some applications to maximize the airflow and for fitment reasons. All kits include a heat shield that seals against the hood and isolates the filter from engine heat, or the Injen Powerflow Box. The Powerflow Box incorporates an EA Nanofiber dry air filter as well as a velocity stack and air stabilizer, and a cold air inducer, all contained in an aluminum housing to protect the filter from heat. The reduction in air intake temperature results in a cooler, denser air intake charge and even more horsepower. So, instead of power-robbing hot air squeezing through a restrictive air filter and intake duct, your engine is taking in huge quantities of cool air surging through free-flowing tubing. The result is increased horsepower and torque, and improved performance.

    But unlike other air intake systems, Injen’s patented MR (Mega Ram) Technology attains this increased intake airflow and performance while maintaining a safe air/fuel ratio. Injen steps down the diameter of the intake tube where the Mass Air Flow (MAF) sensor mounts, enabling the sensor to detect airflow within established parameters. The engine control computer can then maintain the proper air/fuel ratio and optimize horsepower and torque. Simply put, MR Technology tunes the intake system to avoid the necessity of recalibrating the MAF sensor, and prevents your engine from running too lean or too rich. With MR Technology, Injen created “The World’s First Tuned Intake System”, delivering optimum performance with a factory safe air/fuel ratio.

    The PF system is carefully engineered, with CNC machined brackets and adapters, to ensure an exact fit. Installation can be accomplished with simple hand tools and everything necessary for installation is supplied, including comprehensive instructions. The PF Series Air Intake System is backed by a Limited Lifetime Warranty.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Add to cartDone

  • Injen® – Red Air Filter

    0 out of 5
    $66.95
    • Revolutionary Nanofiber filter media
    • Increases airflow
    • Removes more dirt and dust than comparable air filters
    • 25,000 miles or one year before cleaning is necessary
    • Never needs oiling
    • Easily cleaned with a Shop-Vac
    • Guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations
    • Made in USA

    The purpose of an air filter is to prevent dirt from entering and ruining the engine. A performance air filter must do this and also allow increased airflow. Traditionally, if an aftermarket air filter improved airflow while maintaining OEM filtration levels, it would be considered an effective product. But now, with the Injen Universal EA Nanofiber Dry Air Filter, it’s evident that what is considered effective must be redefined.

    The EA Nanofiber air filter is the most efficient air filter available today. Its revolutionary synthetic nanofiber filtering media traps 5 times more dust than traditional cellulose filters and 50 times more dust than wet gauze filter media. And it does this while increasing airflow to the engine, when compared to cellulose media. Cellulose fibers are larger and have larger gaps between fibers, than nanofibers. This causes contaminants to load in the depths of the filter and clog the path of the airflow, resulting in restriction. The synthetic nanofibers in the EA air filter are smaller in diameter, with much smaller spaces between fibers, resulting in more contaminants being captured on the surface of the filter and less restriction.

    EA Nanofiber air filters trap 2 ½ times more contaminants than comparable cellulose media filters. The smaller nanofibers in the media result in more pores per square inch, which creates more dirt holding capacity. The thinner fibers also produce more uniform pore size distribution, improving the filter’s ability to capture and retain particles. EA air filters hold 15 times more contaminants than a wet gauze type air filter.

    Yet with all this dirt holding ability, the EA Nanofiber air filter can go one year or 25,000 miles before cleaning is required, when used under normal conditions. If used off-road, in frequently dusty or other severe duty conditions, the filter should be serviced more often, as determined by operating conditions or by a restriction gauge. The filter is simply cleaned with a Shop-Vac, and never needs oiling. The EA Nanofiber air filter is guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Brand:InjenPart Number:X-1014-BRX-1111-BRX-1022-BRX-1015-BRX-1110-BRX-1021-BRX-1112-BRX-1012-BRX-1017-BRX-1023-BRX-1013-BRX-1109-BRX-1108-BRX-1010-BRX-1020-BRX-1114-BRX-1018-BRX-1107-BRX-1113-BRX-1125-BRX-1134-BRX-1071-BR

    Add to cartDone
  • Product on sale

    Injen® – SP Series Cold Air Intake System

    0 out of 5
    Original price was: $240.95.Current price is: $216.85.
    • Delivers more oxygen to the combustion chamber by drawing in cooler air
    • Uses the patented MR Technology tuning process to ensure the air/fuel ratio is within optimum limits
    • Custom designed and engineered to deliver maximum power for each specific vehicle
    • Improves acceleration and fuel economy
    • Every system includes the EA Nanofiber dry air filter
    • Air intake pipe constructed of mandrel-bent 6061 aluminum for smooth airflow
    • Comes complete with all necessary mounting hardware and comprehensive installation instructions
    • Backed by a Limited Lifetime Warranty
    • Proudly manufactured in the USA

    It’s a well known fact that cooler, denser air contains more oxygen, and more oxygen in your engine’s air intake charge means better combustion and more power. Hot air contains fewer oxygen molecules, and if your engine is fed hot air there will be less oxygen and therefore less power. Yet that’s exactly what your engine gets with the factory air intake systems! The solution to this problem is to install an Injen SP Series Cold Air Intake System.

    Injen starts the power improvement process by positioning an Injen EA Nanofiber dry air filter behind the front bumper. Here, this free-flowing filter can take in the coolest air possible and funnel it through smooth, mandrel-bent 6061 aluminum alloy tubing. Injen designs and repeatedly tests its systems for each application to make sure they’re the least restrictive, all the way to the throttle body. So, instead of power-robbing hot air squeezing through a restrictive air filter and intake duct, your engine is taking in huge quantities of cool air surging through free-flowing tubing. The result is increased horsepower and torque, and improved performance.

    But unlike other cold air intake systems, Injen’s patented MR (Mega Ram) Technology attains this increased intake airflow and performance while maintaining a safe air/fuel ratio. Injen steps down the diameter of the intake tube where the Mass Air Flow (MAF) sensor mounts, enabling the sensor to detect airflow within established parameters. The engine control computer can then maintain the proper air/fuel ratio and optimize horsepower and torque. Simply put, MR Technology tunes the intake system to avoid the necessity of recalibrating the MAF sensor, and prevents your engine from running too lean or too rich. With MR Technology, Injen created “The World’s First Tuned Intake System”, delivering optimum performance with a factory safe air/fuel ratio.

    The SP system is carefully engineered, with CNC machined brackets and adapters, to ensure an exact fit. Installation can be accomplished with simple hand tools and everything necessary for installation is supplied, including comprehensive instructions. The SP Series Cold Air Intake System is backed by a Limited Lifetime Warranty.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Add to cartDone

  • Injen® – SP Series Short Ram Intake System

    0 out of 5
    $264.95
    • Improves airflow into the engine
    • Uses the patented MR Technology tuning process to ensure the air/fuel ratio is within optimum limits
    • Increases horsepower
    • Improves acceleration and fuel economy
    • Easily installs under the hood
    • Every system includes the EA Nanofiber dry air filter
    • Air intake pipe constructed of mandrel-bent 6061 aluminum for smooth airflow
    • Comes complete with all necessary mounting hardware and comprehensive installation instructions
    • Backed by a Limited Lifetime Warranty
    • Proudly manufactured in the USA

    Just because the Injen SP Series Short Ram is a traditional “underhood” system, don’t think it’s any less of a performance air intake system. The SP Series Short Ram is a product of the same rigorous development and testing as Injen’s other air intake systems. It’s made of the same quality materials and features the same high flow EA Nanofiber dry air filter. The air intake tube is made of 6061, T-6 aluminum alloy, for strength, light weight and smooth airflow. All connections are made with quality silicone connectors that provide flexibility, while maintaining strength and thermal stability. The stainless steel hose clamps provide a solid seal that won’t loosen or deteriorate. The end result is a quality system that will improve performance and look great under the hood.

    Where the SP Series Short Ram differs from conventional short ram systems is the inclusion of Injen’s patented MR (Mega Ram) Technology. MR Technology allows this system to attain increased intake airflow and performance while maintaining a safe air/fuel ratio. Injen steps down the diameter of the intake tube where the Mass Air Flow (MAF) sensor mounts, enabling the sensor to detect airflow within established parameters. The engine control computer can then maintain the proper air/fuel ratio and optimize horsepower and torque. Simply put, MR Technology tunes the intake system to avoid the necessity of recalibrating the MAF sensor, and prevents your engine from running too lean or too rich. With MR Technology, Injen created “The World’s First Tuned Intake System”, delivering optimum performance with a factory safe air/fuel ratio.

    The SP Short Ram system installs in place of your factory airbox and air intake tube. It’s carefully engineered, with CNC machined brackets and adapters, to ensure an exact fit. Installation is fast and simple and can be completed under the hood. There’s no need to get underneath the car or do any significant component relocating. Everything necessary for installation is supplied, including comprehensive instructions. The SP Series Short Ram Air Intake System is backed by a Limited Lifetime Warranty.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Add to cartDone

  • Injen® – SuperNano-Web™ Oval Tapered Blue Air Filter

    0 out of 5
    $86.95
    • Revolutionary Nanofiber filter media
    • Increases airflow
    • Removes more dirt and dust than comparable air filters
    • 25,000 miles or one year before cleaning is necessary
    • Never needs oiling
    • Easily cleaned with a Shop-Vac
    • Guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations
    • Made in USA

    The purpose of an air filter is to prevent dirt from entering and ruining the engine. A performance air filter must do this and also allow increased airflow. Traditionally, if an aftermarket air filter improved airflow while maintaining OEM filtration levels, it would be considered an effective product. But now, with the Injen Universal EA Nanofiber Dry Air Filter, it’s evident that what is considered effective must be redefined.

    The EA Nanofiber air filter is the most efficient air filter available today. Its revolutionary synthetic nanofiber filtering media traps 5 times more dust than traditional cellulose filters and 50 times more dust than wet gauze filter media. And it does this while increasing airflow to the engine, when compared to cellulose media. Cellulose fibers are larger and have larger gaps between fibers, than nanofibers. This causes contaminants to load in the depths of the filter and clog the path of the airflow, resulting in restriction. The synthetic nanofibers in the EA air filter are smaller in diameter, with much smaller spaces between fibers, resulting in more contaminants being captured on the surface of the filter and less restriction.

    EA Nanofiber air filters trap 2 ½ times more contaminants than comparable cellulose media filters. The smaller nanofibers in the media result in more pores per square inch, which creates more dirt holding capacity. The thinner fibers also produce more uniform pore size distribution, improving the filter’s ability to capture and retain particles. EA air filters hold 15 times more contaminants than a wet gauze type air filter.

    Yet with all this dirt holding ability, the EA Nanofiber air filter can go one year or 25,000 miles before cleaning is required, when used under normal conditions. If used off-road, in frequently dusty or other severe duty conditions, the filter should be serviced more often, as determined by operating conditions or by a restriction gauge. The filter is simply cleaned with a Shop-Vac, and never needs oiling. The EA Nanofiber air filter is guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Brand:InjenPart Number:X-1023-BBX-1126-BBX-1124-BB

    Add to cartDone

  • Injen® – SuperNano-Web™ Panel Blue Air Filter

    0 out of 5
    $65.95
    • Revolutionary Nanofiber filter media
    • Increases airflow
    • Removes more dirt and dust than comparable air filters
    • 25,000 miles or one year before cleaning is necessary
    • Never needs oiling
    • Easily cleaned with a Shop-Vac
    • Guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations
    • Made in USA

    The purpose of an air filter is to prevent dirt from entering and ruining the engine. A performance air filter must do this and also allow increased airflow. Traditionally, if an aftermarket air filter improved airflow while maintaining OEM filtration levels, it would be considered an effective product. But now, with the Injen Universal EA Nanofiber Dry Air Filter, it’s evident that what is considered effective must be redefined.

    The EA Nanofiber air filter is the most efficient air filter available today. Its revolutionary synthetic nanofiber filtering media traps 5 times more dust than traditional cellulose filters and 50 times more dust than wet gauze filter media. And it does this while increasing airflow to the engine, when compared to cellulose media. Cellulose fibers are larger and have larger gaps between fibers, than nanofibers. This causes contaminants to load in the depths of the filter and clog the path of the airflow, resulting in restriction. The synthetic nanofibers in the EA air filter are smaller in diameter, with much smaller spaces between fibers, resulting in more contaminants being captured on the surface of the filter and less restriction.

    EA Nanofiber air filters trap 2 ½ times more contaminants than comparable cellulose media filters. The smaller nanofibers in the media result in more pores per square inch, which creates more dirt holding capacity. The thinner fibers also produce more uniform pore size distribution, improving the filter’s ability to capture and retain particles. EA air filters hold 15 times more contaminants than a wet gauze type air filter.

    Yet with all this dirt holding ability, the EA Nanofiber air filter can go one year or 25,000 miles before cleaning is required, when used under normal conditions. If used off-road, in frequently dusty or other severe duty conditions, the filter should be serviced more often, as determined by operating conditions or by a restriction gauge. The filter is simply cleaned with a Shop-Vac, and never needs oiling. The EA Nanofiber air filter is guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Brand:InjenPart Number:X-1080-BBX-1061-BBX-1088-BB

    Read moreDone

  • Injen® – SuperNano-Web™ Round Blue Air Filter

    0 out of 5
    $66.95
    • Revolutionary Nanofiber filter media
    • Increases airflow
    • Removes more dirt and dust than comparable air filters
    • 25,000 miles or one year before cleaning is necessary
    • Never needs oiling
    • Easily cleaned with a Shop-Vac
    • Guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations
    • Made in USA

    The purpose of an air filter is to prevent dirt from entering and ruining the engine. A performance air filter must do this and also allow increased airflow. Traditionally, if an aftermarket air filter improved airflow while maintaining OEM filtration levels, it would be considered an effective product. But now, with the Injen Universal EA Nanofiber Dry Air Filter, it’s evident that what is considered effective must be redefined.

    The EA Nanofiber air filter is the most efficient air filter available today. Its revolutionary synthetic nanofiber filtering media traps 5 times more dust than traditional cellulose filters and 50 times more dust than wet gauze filter media. And it does this while increasing airflow to the engine, when compared to cellulose media. Cellulose fibers are larger and have larger gaps between fibers, than nanofibers. This causes contaminants to load in the depths of the filter and clog the path of the airflow, resulting in restriction. The synthetic nanofibers in the EA air filter are smaller in diameter, with much smaller spaces between fibers, resulting in more contaminants being captured on the surface of the filter and less restriction.

    EA Nanofiber air filters trap 2 ½ times more contaminants than comparable cellulose media filters. The smaller nanofibers in the media result in more pores per square inch, which creates more dirt holding capacity. The thinner fibers also produce more uniform pore size distribution, improving the filter’s ability to capture and retain particles. EA air filters hold 15 times more contaminants than a wet gauze type air filter.

    Yet with all this dirt holding ability, the EA Nanofiber air filter can go one year or 25,000 miles before cleaning is required, when used under normal conditions. If used off-road, in frequently dusty or other severe duty conditions, the filter should be serviced more often, as determined by operating conditions or by a restriction gauge. The filter is simply cleaned with a Shop-Vac, and never needs oiling. The EA Nanofiber air filter is guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Brand:InjenPart Number:X-1091-BBX-1090-BBX-1092-BB

    Add to cartDone

  • Injen® – SuperNano-Web™ Round Straight Blue Air Filter

    0 out of 5
    $73.95
    • Revolutionary Nanofiber filter media
    • Increases airflow
    • Removes more dirt and dust than comparable air filters
    • 25,000 miles or one year before cleaning is necessary
    • Never needs oiling
    • Made in USA

    The purpose of an air filter is to prevent dirt from entering and ruining the engine. A performance air filter must do this and also allow increased airflow. Traditionally, if an aftermarket air filter improved airflow while maintaining OEM filtration levels, it would be considered an effective product. But now, with the Injen Universal EA Nanofiber Dry Air Filter, it’s evident that what is considered effective must be redefined.

    The EA Nanofiber air filter is the most efficient air filter available today. Its revolutionary synthetic nanofiber filtering media traps 5 times more dust than traditional cellulose filters and 50 times more dust than wet gauze filter media. And it does this while increasing airflow to the engine, when compared to cellulose media. Cellulose fibers are larger and have larger gaps between fibers, than nanofibers. This causes contaminants to load in the depths of the filter and clog the path of the airflow, resulting in restriction. The synthetic nanofibers in the EA air filter are smaller in diameter, with much smaller spaces between fibers, resulting in more contaminants being captured on the surface of the filter and less restriction.

    EA Nanofiber air filters trap 2 ½ times more contaminants than comparable cellulose media filters. The smaller nanofibers in the media result in more pores per square inch, which creates more dirt holding capacity. The thinner fibers also produce more uniform pore size distribution, improving the filter’s ability to capture and retain particles. EA air filters hold 15 times more contaminants than a wet gauze type air filter.

    Yet with all this dirt holding ability, the EA Nanofiber air filter can go one year or 25,000 miles before cleaning is required, when used under normal conditions. If used off-road, in frequently dusty or other severe duty conditions, the filter should be serviced more often, as determined by operating conditions or by a restriction gauge. The filter is simply cleaned with a Shop-Vac, and never needs oiling. The EA Nanofiber air filter is guaranteed for 4 years or 100,000 miles, whichever comes first, when serviced according to recommendations.

    Injen Technology Company, Ltd., based in Pomona, California, was formed as a sister company to RD Metal Works in 1998, to utilize the experience and design capabilities that RD Metal Works had gained designing and manufacturing air intake kits for leading air filter and intake manufacturers. Since that time, the company has made it a point to stay at the forefront of performance technology, continually setting new standards for quality and improving their engineering and manufacturing capabilities. This enables Injen to regularly introduce new, cutting edge products to market and has required the company to continually expand to meet the demand for those products. Today, Injen continues to set the industry benchmark for innovation, styling and technology.

    Brand:InjenPart Number:X-1056-BBX-1049-BBX-1058-BBX-1062-BB

    Add to cartDone

  • Intro-Tech® – Custom Auto Shade™

    0 out of 5
    $30.48

    Made using a multi-layered material to reflect UV rays
    This Intro-Tech Custom Auto Shade features an advanced multi-layered construction that blocks and reflects damaging UV rays, thus keeping your interior protected.

    Multi-layered material with a gold or silver metalized outer film that reflects harmful UV rays
    This top-of-the-line Intro-Tech Custom Auto Shade is crafted from an advanced multi-layered material and features an eye-catching gold or silver metalized outer film to block and reflect damaging UV rays, thus keeping your interior protected.

    Proven to reduce the inside temperature up to 40 degrees Fahrenheit
    By significantly minimizing the temperature inside your vehicle, the shade protects the dashboard from fading, prevents expensive leather seats from cracking, and keeps the steering wheel and shift knob comfortable to the touch.

    Designed to be easy to roll up and stow
    This sunshade is designed with your convenience in mind. It is very easy to roll up and comes with an attached hook and loop fastener strap that makes it easy to stow.

    Finished with a UV-resistant, non-abrasive velour binding
    This Intro-Tech sunshade is covered with a velour finish that offers exceptional wear and UV resistance as well as looks great.

    Covered with a lifetime warranty
    Intro-Tech sunshades are guaranteed to be free from defects in materials and workmanship for the lifetime of the product.

    Don’t let UV rays and extreme heat degrade your vinyl dashboard and interior. And that goes double if you have leather seats; the damaging effect of solar radiation is two-fold: the UV radiation will attack the plastic and leather directly. Solar heating can raise the interior temperature of a parked vehicle to nearly 180°, hot enough to burn your hands on the metal seatbelt buckle or steering wheel. Needless to say, that kind of heat can’t be good for soft vinyl or leather. It will bake the volatile plasticizers and oils right out of them. They will turn hard, and eventually crack.

    Most cars have tinted windows, and you can add tinting to the side and back windows, but federal law (and common sense, we hope) prohibits the windshield from being tinted enough to really keep out the sun. The best way, if you can’t park inside all day every day, is a shade to reflect the UV back and to insulate from the heat. The Custom Auto Shade starts with a highly reflective layer of aluminized Mylar, which can reflect both short-wave ultra-violet and long-wave infrared radiation. The multi-layer material will then supply additional insulation to keep heat from infiltrating the interior. The Intro-Tech Automotive Custom Auto Shade is available in a custom-fit for your vehicle; there are 2,600 patterns in their computer-based cutting machine.

    You can expect the temperature of your interior to remain as much as 40° F cooler when the Custom Auto Shade is used. It takes only a few seconds to unroll the Custom Auto Shade and install it on the dash, and just as long to roll it up for stowage.

    Intro-Tech® is based in sunny Southern California, and has been in business since 1991. Their product line includes floor mats, car covers, car sunshades, winter windscreen shields and the innovative PitStop Furniture line of race-inspired furniture. They manufacture all of their products themselves in their Chino facility, using the latest in Computer Aided Design and cutting technology. Because they use only the finest materials to produce their products, they are able to offer a lifetime warranty on everything they sell.

    Add to cartDone

  • Intro-Tech® – Custom Premium™ Folding Auto Shade

    0 out of 5
    $33.93

    Perfect solution to protect your interior from heat and UV damage
    This shade is the perfect way to keep the steering wheel and shift knob comfortable to the touch as well as prevent the dashboard and seats from fading and cracking.

    Two reinforced panels for an ideal upright position
    Custom Premium Folding Auto Shade features a seven-layer construction with five layers of support panels and two reinforced panels that are sure to keep the sunshade upright at any time.

    Proven to reduce the inside temperature by as much as 40 degrees F
    Manufactured from superior-grade materials and featuring a multi-layered construction, the shade reduces heat buildup by as much as 40 degrees Fahrenheit.

    Installs in seconds and comes with its own drawstring storage bag
    This sunshade fits your specific vehicle perfectly, installs in less than no time, and stores in the included drawstring storage bag.

    Covered with a lifetime warranty
    Intro-Tech sunshades are guaranteed to be free from defects in materials and workmanship for the lifetime of the product.

    Don’t let UV rays and extreme heat degrade your vinyl dashboard and interior. And that goes double if you have leather seats; the damaging effect of solar radiation is two-fold: the UV radiation will attack the plastic and leather directly. Solar heating can raise the interior temperature of a parked vehicle to nearly 180°, hot enough to burn your hands on the metal seatbelt buckle or steering wheel. Needless to say, that kind of heat can’t be good for soft vinyl or leather. It will bake the volatile plasticizers and oils right out of them. They will turn hard, and eventually crack.

    Most cars have tinted windows, and you can add tinting to the side and back windows, but federal law (and common sense, we hope) prohibits the windshield from being tinted enough to really keep out the sun. The best way, if you can’t park inside all day every day, is a shade to reflect the UV back and to insulate from the heat. The Custom Auto Shade starts with a highly reflective layer of aluminized Mylar, which can reflect both short-wave ultra-violet and long-wave infrared radiation. The multi-layer material will then supply additional insulation to keep heat from infiltrating the interior. The Intro-Tech Automotive Custom Auto Shade is available in a custom-fit for your vehicle there are 2,800 patterns in their computer-based cutting machine.

    You can expect the temperature of your interior to remain as much as 40°F cooler when the Custom Auto Shade is used. It takes only a few seconds to unroll the Custom Auto Shade and install it on the dash, and just as long to roll it up for stowage.

    Intro-Tech® is based in sunny Southern California, and has been in business since 1991. Their product line includes floor mats, car covers, car sunshades, winter windscreen shields and the innovative PitStop Furniture line of race-inspired furniture. They manufacture all of their products themselves in their Chino facility, using the latest in Computer Aided Design and cutting technology. Because they use only the finest materials to produce their products, they are able to offer a lifetime warranty on everything they sell.

    Add to cartDone

  • Intro-Tech® – Custom Snow Shade™

    0 out of 5
    $29.33

    Perfect solution to keep your windshield free from snow and ice
    Designed to withstand the harshest winter conditions, the Intro-Tech snow shade offers exceptional protection against ice, snow, and many other elements. On sunny winter days, it protects leather seats from becoming hot and cracking while keeping the steering wheel and shift knob comfortable to the touch.

    Manufactured from a superior-quality complex four-layered material
    This snow shade features an advanced four-layered construction. The outer layer is a clear coat film that ensures the material will never absorb liquids. The second layer is a metalized, imprinted film in a neat snowflake design. The third layer is an industrial strength mesh liner and, finally, the fourth layer is black, highly-resilient PVC.

    Quick-release one-inch strap for easy installation and greater security
    This snow shade is precision-cut to fit your vehicle ideally and comes with a quick-release strap that makes installation a snap as well as improves security.

    Easy to roll up and store (storage bag included)
    Made with your convenience in mind, the Intro-Tech snow shade rolls up in no time flat and stores in a lightweight yet durable storage bag that is provided in the kit.

    Covered with a lifetime warranty
    Intro-Tech snow shade is guaranteed to be free from defects in materials and workmanship for the lifetime of the product.

    The Custom Auto Snow shade is made from a four-layer fabric. The first, outer layer is a clear-coat film that prevents moisture from being absorbed into the fabric. The second layer is a metalized film imprinted with a snowflake design. The next layer is a fabric mesh that’s both flexible and highly durable, followed by a tough layer of black PVC plastic. A quick release snap system keeps it in place, and because the snap is locked inside the car, preventing casual theft. The lower edge is held in place by simply lifting the windshield wiper blades and resting them on the fabric.

    They’re not called Custom Auto Shades for nothing; they’re cut from one of 2,600 patterns in Intro-Tech Automotive CNC-operated cutting machine, insuring that not an extra square inch of your windshield lacks coverage. After a quick shake to remove any ice or snow, simply roll it up and stuff it into the handy storage bag.

    Intro-Tech® is based in sunny Southern California, and has been in business since 1991. Their product line includes floor mats, car covers, car sunshades, winter windscreen shields and the innovative PitStop Furniture line of race-inspired furniture. They manufacture all of their products themselves in their Chino facility, using the latest in Computer Aided Design and cutting technology. Because they use only the finest materials to produce their products, they are able to offer a lifetime warranty on everything they sell.

    Add to cartDone

  • Intro-Tech® – Intro-Guard™ Silver Custom Car Cover

    0 out of 5
    $181.56

    Comes with a storage bag for easy handling
    The Intro-Tech Intro-Guard custom car cover includes a convenient storage bag to easily store it in your trunk.

    Includes a cable lock kit at no additional cost
    The Intro-Tech Intro-Guard custom car cover comes with a cable lock kit to lock down the cover to deter theft.

    Complete with all-weather lock strap system
    The innovative all-weather lock strap system will keep the cover down and secure to prevent it from blowing off in the event of a storm or high wind.

    Fitted with custom-tailored mirror pockets for a great fit
    Featuring side mirror pockets and eyelets for a cable lock, this cover a snug fit all around with long and low coverage to keep wheels clean.

    Lightweight design for convenient use and storage
    This lightweight cover is easy to take on and off. It folds for easy and compact storage when not in use.

    Complete with custom tailored mirror pockets and eyelets for cable lock kit, it is designed for a snug fit all around with long and low coverage to keep wheels clean. The innovative all weather lock strap system, positioned in front of the front wheels and behind the rear wheels make it both storm and high wind resistant. In addition to being the only lifetime warranted car cover on the market today, it comes complete with both a storage bag and cable lock kit at no additional cost. This ultimate Full Custom Car Cover is engineered for both inside and outside use, it is a must have accessory for all owners desiring to protect their vehicle from all weather elements and extreme high/low temperatures.

    Intro-Tech® is based in sunny Southern California, and has been in business since 1991. Their product line includes floor mats, car covers, car sunshades, winter windscreen shields and the innovative PitStop Furniture line of race-inspired furniture. They manufacture all of their products themselves in their Chino facility, using the latest in Computer Aided Design and cutting technology. Because they use only the finest materials to produce their products, they are able to offer a lifetime warranty on everything they sell.

    Add to cartDone

End of content

End of content